Thomas' Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Managing networking in Debian ======

===== Showing info about a bridge interface =====

<code>
brctl show <bridgename>
</code>

This requires the ''bridge-utils'' package.

===== Setting up VLAN interfaces =====

In /etc/modules add the line to load the module automatically on startup:
<code>
8021q
</code>

Load the module manually for the current session:
<code>
modprobe 8021q
</code>

Install VLAN management tools:
<code>
apt install vlan
</code>

Now, in ''/etc/network/interfaces'', you can define vlan interfaces as such:

<code>
auto eth0.222
iface eth0.222 inet static
        address 10.10.10.1/24
        vlan-raw-device eth0
</code>

The vlan-raw-device parameter is optional, if you use the standard name format (''interface.vlanid''). If you use the alternative naming scheme (vlanXXX), then it must be added to refer to the underlying interface.

If you create VLAN interfaces only to put them into a bridge, there is no need to define the VLAN interfaces manually. Just config the bridge, and the VLAN interface will be created automatically when creating the bridge.
===== Show overview of active VLANs =====

<code>
cat /proc/net/vlan/config 
VLAN Dev name    | VLAN ID
Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
enp10s0.2      | 2  | enp10s0
enp10s0.6      | 6  | enp10s0
</code>


===== References =====

  * https://wiki.debian.org/NetworkConfiguration